Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD port located on the 2010 Mini Cooper?

Model: Mini Mini R56, R57, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

Video tutorial

If you own a 2010 Mini Cooper and are curious to find out exactly where the OBD port of the car is located, then all you have to do is pay attention to the steps described below and put them into practice. First, enter the vehicle and make sure the car is turned off. Then you can leave the door open to have more freedom of movement and focus your attention on the bottom of the dashboard.

At this point, locate the OBD port on the left side and possibly connect a diagnostic tool to it.


Posted on 24 September 2025 by ScegliAuto


Related tutorials

Mini (2007-2014 / R56, R57, R55) To safely locate the OBD port inside your Mini Cooper R56, you just need to follow the steps described in the following guide addressed to you. First…
Mini (2007-2014 / R56, R57, R55) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
Mini (2007-2014 / R56, R57, R55) To find the OBD port in your 2009 Mini Cooper in just a few seconds, carefully read the following guide and apply all the steps described. First, go …

    Frequently Asked Questions

    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

Location of the Jack and Spare Wheel of the Toyota Yaris

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.

Watch the video!


by ScegliAuto

More videos