Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Replacing bulbs on a Mini

Mini - Video tutorial

Model: Mini Mini F55, F57, F56 - Years 2014-2023
Part: Light bulb
Operation: Replacing bulbs on a Mini

Let's see the replacement of bulbs on a Mini. We open the front hood by pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We remove the inspection cap of the headlight (located in the rear part of the front headlight). Removed the caps, we will find the bulbs with the metal hooks; we take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We reassemble all the previously disassembled pieces.


Posted on 26 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2010-2016 - What does the EML warning light on the Mini Cooper indicate? Read Answer
    • Mini 2017-2023 - How do you replace the brake light bulb on the 2017 Mini? Read Answer
    • Mini 2014-2023 - What bulbs does the Mini Cooper have? Read Answer
    • Mini 2007-2014 - How much does a Mini Cooper reverse light bulb cost? Read Answer
    • Mini 2010-2016 - Spy with exclamation mark on Mini car? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos