Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the rear light bulbs on a Mini Cooper

Model: Mini Mini R50, R52, R53 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light bulb

See other generations:
Video tutorial

This guide provides instructions on how to disassemble and replace the rear light and its bulbs on a Mini Cooper. First, open the rear hatch of the boot and begin to remove the plastic cover found on the side of the boot space; unscrew the light's screw and disconnect the electrical connector for the lights, removing it from the outside as shown in the video.

At this point, separate the bulb holder from the light unit, replacing any faulty bulbs with new ones; reassemble the rear light, reconnecting it and testing the operation of all the lights.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

Mini (2014-2023 / F56, F55, F57, F54) In a few simple steps, we will see how to disassemble the rear light and replace its bulbs on the Mini Cooper. First, let's open the rear hatch of th…
Mini (2001-2007 / R50, R52, R53) In this video tutorial, you will learn how to remove the rear light and replace any bulbs on a Mini Cooper. First, open the boot and remove the side …
Mini (2014-2023 / F56, F55, F57, F54) Briefly, here are the step-by-step instructions on how to remove and replace the rear light bulbs on a Mini Cooper. First, open the boot lid and begi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Adjusting the Handbrake on a Kia Sportage

Today, learn how to adjust the handbrake on a Kia Sportage (2016-2022). Start by opening the armrest and removing the bottom with a small flat screwdriver as shown in the video. Next, remove the inner panel on the handbrake side to access its adjustment nut. Once done, use a spanner to turn the nut clockwise to increase the handbrake tension, or alternatively, loosen the tension by turning the nut anti-clockwise. After adjusting the cable tension, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos