Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reversing Light Bulb on the Mini Cooper

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Light bulb

See other generations:
Video tutorial

In this guide, discover the main instructions on how to remove and replace the reversing light bulb on the Mini Cooper. First, move to the rear of the vehicle and start by removing the reversing light from inside the rear bumper, unscrewing the fastening screws and disconnecting the electrical connector; separate the bulb holder from the lens to access the reversing light, as shown in the video.

At this point, remove and install the new reversing light, reassembling the light unit on the bumper and checking the operation of the light!


Posted on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Reversing Light Switch on a Mini Cooper S?
How to Replace the Reversing Light Switch on a Mini Cooper S?
Mini (2001-2007 / R53, R50, R52) To replace the reversing light switch on a Mini Cooper S, lift the bonnet to access the engine bay. The reversing light switch is located beneath the…
How to Replace the Reverse Light Bulb on a Mini Cooper
How to Replace the Reverse Light Bulb on a Mini Cooper
Mini (2001-2007 / R53, R50, R52) This video shows how to replace the reverse light bulb on a Mini Cooper produced from 2001 to 2007. You will need a few screwdrivers for this operati…
How to replace the dipped headlight bulb of the Mini Cooper
How to replace the dipped headlight bulb of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) In this guide we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Mini Cooper.…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos