Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the rear light on a Mini

Model: Mini Mini R50, R52, R53 - Years 2001-2007
Part: Tail light

Is the rear light on the Mini damaged and in need of replacement? Let's see how to proceed. We open the tailgate of the luggage compartment and put it in safety; open the plastic inspection cap (located in the luggage compartment) and unscrew all the screws that block the headlight (equal pieces of measurement and voltage). We detach the lighthouse from its housing with a lever and disconnect the power supply terminals. After removing the damaged headlight, we mount the new headlight in the sheet metal of the car, screw in the clamping screws and close the side compartment of the trunk. Let's check the operation of the bulbs.

Posted on 4 May 2020 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Mini Countryman?
How do you replace the rear headlight bulb of the Mini Countryman?
Mini (2010-2016 / Countryman1, R60) In order to replace the rear headlight bulb of the Mini Countryman, you need to open the rear hatch so that you can locate the interior panel of the …
Replacement of the rear light bulb of the Mini Cooper.
Replacement of the rear light bulb of the Mini Cooper.
Mini (2014-2023 / F57, F54, F56, F55) In a few simple steps, we will see how to disassemble the rear light and replace its bulbs on the Mini Cooper. First, let's open the rear hatch of th…
How do you replace the rear headlight bulb of the Mini Cooper?
How do you replace the rear headlight bulb of the Mini Cooper?
Mini (2007-2014 / R57, R55, R56) In order to replace the rear headlight bulb of the Mini Cooper, you need to pry with an object to detach the chrome trim around the headlight. Once t…

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos