Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob

Model: Mini Mini R50, R52, R53 - Years 2001-2007
Part: Shift knob

Here’s a simple video showing how to replace the gear knob of a Mini Cooper. After removing the old knob, secure the gaiter (which should be turned inside out) to the gear lever with a plastic tie. Align the base of the gaiter with the base of the gear lever so that the fixing points are well aligned. Attach the circular clip (made of two pieces) at the junction between the base of the knob and the top of the gaiter, using a knife if necessary. Take the new knob and, after aligning it correctly, apply some pressure to ensure it clips onto the installed clip.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Gear Knob
Replacing Gear Knob
Mini (2001-2007 / R50, R52, R53) Obtain a new gear knob suitable for the vehicle in question. First, unclip the cover of the gear lever by pulling it upwards while pressing down on t…
Replacing the Manual Gear Knob on the Mini Cooper
Replacing the Manual Gear Knob on the Mini Cooper
Mini (2001-2007 / R50, R52, R53) Follow these steps to remove and replace the gear knob on the manual gearbox of the Mini Cooper. First, get inside the cabin and pull the gear knob u…
Complete Disassembly of the Car Radio
Complete Disassembly of the Car Radio
Mini (2001-2007 / R50, R52, R53) Using a plastic tool to avoid damaging the bodywork, lever at the base of the tunnel around the gear lever to release the plastic clips and move it t…

How to Remove the Rear Wiper Blade on a Citroen C3

This guide shows you how to remove and replace the rear wiper blade on a Citroen C3. Grasp the rear wiper blade with your hands, gently pull the rubber from the moving blade (without breaking it), and slide it off the arm on the left. Fit the new wiper rubber onto the arm (if the rubber is original, you may need to adjust the length by cutting it as shown). Finally, lower the wiper arm onto the rear window and test the new blade by activating the rear wiper. It is always preferable to use original parts for better durability and quality.

Watch the video!


by ScegliAuto

More videos