Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Tire check and rotation

Mini - Video tutorial

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Tires
Operation: Tire check and rotation

The tire replacement operation is very simple as it is sufficient to use the tools normally supplied with the car. Constant checking of tire pressure and wear is of fundamental importance to ensure that the car is held on the road. To ensure uniform wear of the tires it is necessary to change their position approximately every 20,000 km traveled. The rotation must follow a very precise pattern, crossing the front ones with the rear ones. Almost all tire manufacturers incorporate references in them to visualize the wear and tear of the tread. When these signs are highlighted it means that the tread no longer guarantees perfect road holding, therefore it is necessary to replace them.


Posted on 9 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2001-2007 - What is the tire warning light for in the Mini? Read Answer
    • Mini 2007-2014 - When does the tire warning light come on in the Mini? Read Answer
    • Mini 2010-2016 - What does the tire pressure light on the Mini One D mean? Read Answer
    • Mini 2014-2023 - What is the red light with the exclamation point for in the Mini? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos