Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the tyre pressure warning light on the Mini F55

Model: Mini Mini F56, F57, F54, F55 - Years 2014-2023
Part: Tire pressure warning light

The appearance of an orange icon, shaped like a section of a tyre with an exclamation mark inside, on the small display at the centre of the instrument cluster in front of the steering wheel of the Mini indicates that the control system has detected a drop in pressure in one of the tyres. As soon as possible, check the pressures when the tyres are cold, and if necessary, restore the correct values, referring to the table located in the driver's door frame. Once done, reset the warning light: turn on the instrument panel, using the button at the top of the lever on the left of the steering wheel, select "set/info" on the display, and hold the button for a few seconds. Press the button again to display the tyre warning light with the word reset, release, and press again until the tick mark appears.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2014-2023 / F56, F57, F54, F55) In this tutorial, we will see how to reset the tyre warning light in a Mini Cooper, a very simple and quick operation to perform only after restoring…
Mini (2014-2023 / F56, F57, F54, F55) In this tutorial, you will learn how to reset the tyre light on a Mini Cooper, a very simple and quick operation, to be performed only after restorin…
Mini (2014-2023 / F56, F57, F54, F55) If you notice that the low tyre pressure warning light on your vehicle has illuminated, you need to check the inflation pressures and inflate the tyr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos