Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the Mini under roof

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Checks and maintenance

Remove the roof panel on a Mini? Let's see all the pieces to be disassembled to remove the cover panel. To disassemble the cover panel, we begin by removing the side handles of the roof with a screwdriver, then, we disassemble the sun visors of the car and the upper lighting system positioned in the panel. We detach the covers on the sides of the uprights. We peel off the sky panel around the perimeter of the car roof, remove it from the inside of the car. Be careful when taking it out of the car as it could break. We replace the panel with a new one or repair the old one.

Posted on 24 October 2020 by ScegliAuto

Video tutorial

Related tutorials

How to open the sunroof of the Mini Cooper
How to open the sunroof of the Mini Cooper
Mini (2014-2023 / F55, F54, F57, F56) Following today's instructions, we will see how to open the sunroof of the Mini Cooper in simple and quick steps. First, we get into the vehicle and …
How to open the panoramic roof of the Mini Cooper.
How to open the panoramic roof of the Mini Cooper.
Mini (2014-2023 / F55, F54, F57, F56) In this video tutorial, we will see the instructions that will allow us to open the panoramic roof of the Mini Cooper in simple and quick steps. Firs…
How to reset the sunroof of a Mini Cooper.
How to reset the sunroof of a Mini Cooper.
Mini (2010-2016 / R60, Countryman1) In this video, we see how to reset the sunroof of a Mini Cooper. In fact, when the button to open the sunroof was pressed, only noise could be heard,…

    Frequently Asked Questions

    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos