Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing front bulbs on Mini R50

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Headlight bulb

Replacing the front bulbs (in this tutorial we will take the low beam as an example) on Mini R50, R52 and R53 is really simple and now we will show you. First, lift the hood and put on the special support rod. Unhook the metal catch holding the rear light cover in place and remove the cover. Rotate slightly and extract the rear attachment of the bulb, disconnect the connector and extract the bulb itself (again, turn slightly). Obviously proceed backwards until complete reassembly. As you can see, this is not a complex operation.

Posted on 13 April 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight of the Mini Cooper
Replacement of the front headlight of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) These short and simple steps will show us the process of disassembling and replacing the front headlight and bulbs of the Mini Cooper. First, we open…
Front Headlamp Bulb Replacement
Front Headlamp Bulb Replacement
Mini (2001-2007 / R53, R50, R52) For the vehicle in question, the clips are fixed to the front bonnet: therefore, once you have opened and lifted the bonnet, there is enough space to…
Where are the fuses of the Mini R50 located?
Where are the fuses of the Mini R50 located?
Mini (2001-2007 / R53, R50, R52) The fuses of the Mini R50 are divided into the appropriate fuse boxes: in this model of car there are two. The first is located inside the passenger …

How to Reset the Service Light on a Fiat 500

In this video, learn how to reset the oil maintenance service indicator on a Fiat 500. This is a very simple operation. Enter the vehicle and turn on the ignition. Press the accelerator pedal three times in quick succession, then release the pedal. Turn off the ignition and remove the key from the ignition lock. Reinsert the key and turn on the ignition, then wait for the indicator to illuminate. Finally, check the changes made to the car. Always remember to perform onboard computer modifications with the engine off.

Watch the video!


by ScegliAuto

More videos