Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Mini Countryman

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Service warning light

Before we can begin, we will have to go and sit in the driver's seat of our Mini Countryman. So let's start by turning on the car, turning the key inside the ignition lock. After that, we will have to go and press the "BC" button repeatedly, until the time appears on the multifunction display. Once this is done, we will have to press and hold the "BC" and "0.0" buttons at the same time, until we reach the service screen. At this point, we will have to press the "BC" button once, and then keep it pressed again until the "Service" light goes out, and we have completed the reset.

Posted on 24 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Mini Countryman?
How to reset the "Service" light on a Mini Countryman?
Mini (2017-2023 / F60, Countryman2) To reset the "Service" light on a Mini Countryman, start by turning on the instrument panel without starting the engine. Press the button located bel…
How to reset the service in the Mini Countryman?
How to reset the service in the Mini Countryman?
Mini (2010-2016 / Countryman1, R60) Resetting the service light in the Mini Countryman is very simple, let's see how to proceed in this video. Obviously, this operation must only be car…
How do you reset the service indicator in the Mini Countryman?
How do you reset the service indicator in the Mini Countryman?
Mini (2010-2016 / Countryman1, R60) The legendary Mini, specifically the Mini Countryman featured in the video, does not differ from other cars in terms of warning lights, in fact, we a…

Other guides you may be interested in

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos