Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on a Mini Cooper R56.

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Warning light – error code

This video will show us how to reset the service in a Mini Cooper R56. To begin we will have to turn on the panel, displaying the message indicating to carry out the check (the service message). We will then have to press the button on the tachometer, as shown at 0: 30 and hold for about 10 seconds. After that we will have to go to act on the left lever behind the steering wheel, pressing the button at the end, as shown at 0:45. Keep it pressed until the word reset appears. Press again, maintaining the pressure, for another 5 seconds and the reset will be carried out.

Posted on 23 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R56, R57, R55) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R56, R57, R55) To safely locate the OBD port inside your Mini Cooper R56, you just need to follow the steps described in the following guide addressed to you. First…
How to reset the service indicator on a Mini Cooper R56
How to reset the service indicator on a Mini Cooper R56
Mini (2007-2014 / R56, R57, R55) In this video, we see how to reset the service light of a Mini Cooper R56: turn on the instrument panel and press the BC button repeatedly on the ins…

Other guides you may be interested in

How to Change the Cabin Filter on a Fiat Punto Evo

How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then remove the plastic cover from the filter cap (located inside the centre tunnel), and extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing: refit the filter cap and secure the container (close the glove compartment located in the centre tunnel). Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos