Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Replace the Headlining of the Mini Cooper

Model: Mini Mini R53, R52, R50 - Years 2001-2007

Below are the main instructions that will allow you to remove and replace the headlining or interior roof lining of the Mini Cooper. First, get inside the vehicle and start by removing the sun visors by unscrewing the fixing screws; then remove the grab handles found at the top and the interior light unit, using a thin lever and disconnecting the electrical connectors, as shown in the video. Finally, remove the side pillars and start taking down the roof lining, following the video tutorial to the end!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2001-2007 / R53, R52, R50) In this guide, we will see the steps that will allow us to disassemble and replace the headliner or the interior lining of the roof of the Mini Coope…
Mini (2001-2007 / R53, R52, R50) In order to replace the headliner of the Mini Cooper S, you need to loosen all the screws that secure the lining to the top of the roof, so that it c…
Mini (2007-2014 / R56, R55, R57) Today, follow the procedure to remove and replace the antenna base on a Mini Cooper, using the instructions below. First, open the boot and gently de…

    Frequently Asked Questions

    • Mini 2007-2014 - How much coolant does a Mini Cooper need? Read answer
    • Mini 2010-2016 - Where is the inflation kit located on the Mini Countryman? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos