Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the wiper blades on the Mini One?

Model: Mini Mini F55, F54, F57, F56 - Years 2014-2023
Part: Windshield wipers

In order to replace the Mini One wiper blades, you need to lift the connecting hook between the arm connected to the motor and the blade itself. Once the brush has been disconnected, it will be possible to remove the brush so that it is removed from the hooked part at the end of the arm. At this point, it will be possible to position the new brush at the end of the arm, connecting it with the relative pin. After the operation has been carried out for the other brush as well, it will be possible to position the new brushes on the windshield and check that they work correctly.

Posted on 24 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield wiper blades of the Mini F60
How to replace the windshield wiper blades of the Mini F60
Mini (2017-2023 / Countryman2, F60) If the windshield wipers brushes of your Mini F60 are now too worn out and you want to replace them on your own, then all you have to do is read the …
How to replace the wiper blades of the Mini Mino r50
How to replace the wiper blades of the Mini Mino r50
Mini (2001-2007 / R52, R50, R53) By carefully following the operations indicated in the video, you cannot go wrong in installing the wiper blades on your Mini Mino r50. First, make s…
How do you replace the starter motor on the Mini?
How do you replace the starter motor on the Mini?
Mini (2001-2007 / R52, R50, R53) In order to replace the starter motor of the Mini you have to go and open the hood, in order to have access to the components inside the engine compa…

How to Remove the High-Pressure Fuel Pump on VW Golf

In this video, learn how to remove the high-pressure fuel pump on the Volkswagen Golf. Lift the bonnet and secure it, then remove the engine soundproofing panel. Using a screwdriver, unscrew the locking pins of the ventilation pipe and remove the piece from the engine bay. Start removing the fastening pins of the pump as shown in the video. Once the piece is detached from its seat, disconnect the clip present on it. Finally, refit the high-pressure fuel pump in the engine bay, along with the intake pipe and the soundproofing panel.

Watch the video!


by ScegliAuto

More videos