Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna on Mini Cooper R56

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Antenna

If we want to proceed to mount the antenna on the roof of this car we can follow the instructions below and refer to the video. First of all it is necessary to open the tailgate, remove the upper gasket and detach the lining of the internal roof in this way we will have access to the fixing nut of the antenna base and with a 19 wrench we proceed to unscrew it. Then from the outside we go to disconnect the power supply terminal. Finally let's get the new antenna, connect the power terminal, place it on the roof and tighten the fixing nut again from the inside.

Posted on 19 January 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you remove the antenna on the Mini Cooper R56?
How do you remove the antenna on the Mini Cooper R56?
Mini (2007-2014 / R55, R57, R56) Let's see in this video how to disassemble the antenna and its base on the Mini Cooper R56, following these simple steps. First we open the boot lid …
How to replace the antenna base of the Mini Cooper.
How to replace the antenna base of the Mini Cooper.
Mini (2007-2014 / R55, R57, R56) Today we will see the procedure that will allow us to disassemble and replace the base of the Mini Cooper antenna, following the instructions below. …
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R55, R57, R56) To safely locate the OBD port inside your Mini Cooper R56, you just need to follow the steps described in the following guide addressed to you. First…

How to Remove the Driver's Door Panel on a Fiat 600

How to remove the driver's door panel on a Fiat 600? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a screwdriver to unscrew the fastening pins on the handle located on the door panel, and unscrew the pins in the plastic of the door opening lever. Remove the handle from the door panel, then use a lever to detach the upper trim panel. Detach the glove compartment panel at the bottom of the door with the lever. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos