Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Driver's Door Panel on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Door trim panel

How to remove the driver's door panel on a Fiat 600? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a screwdriver to unscrew the fastening pins on the handle located on the door panel, and unscrew the pins in the plastic of the door opening lever. Remove the handle from the door panel, then use a lever to detach the upper trim panel. Detach the glove compartment panel at the bottom of the door with the lever. Reassemble everything in reverse order.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Seicento (1998-2010 / MK 1) To remove the inner door panel of the Fiat 600, follow these instructions. Use a screwdriver to remove the screws securing the handle (one screw is h…
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Fiat Seicento (1998-2010 / MK 1) How to remove the wing mirror from your car? This is a simple operation. Follow these steps to remove the passenger side wing mirror on a Fiat 600. U…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos