Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel of the Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Car door

To remove the inner door panel of the Fiat 600, follow these instructions. Use a screwdriver to remove the screws securing the handle (one screw is hidden behind the door opening lever); now, using a plastic lever, detach the clips holding the panel in place (do this gently to avoid breaking the plastic supports). If you need to detach the pocket, unscrew the central screw hidden by the cap and all the screws around the perimeter of the pocket. To reassemble, follow the same procedure in reverse.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Driver's Door Panel on a Fiat 600
How to Remove the Driver's Door Panel on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to remove the driver's door panel on a Fiat 600? This video explains how to proceed. Before starting the disassembly, disconnect the battery term…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Removing Air Conditioning Knobs on Fiat 600
Removing Air Conditioning Knobs on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Replace the air knobs on a Fiat 600 if they are damaged or the bulbs are out. Before removing the knobs, take off the cover panel. Unscrew the securi…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos