Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Passenger Side Wing Mirror on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Side mirror

How to remove the wing mirror from your car? This is a simple operation. Follow these steps to remove the passenger side wing mirror on a Fiat 600. Unscrew the securing screws of the mirror with a screwdriver (located around the plastic cover base), then remove the mirror with the control cable attached in the car door. For reassembly: refit the mirror with the control cable; screw in the securing pins on the plastic that is fixed to the metal of the door. Finally, check the correct assembly and operation of the mirror.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Rear-View Mirror on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video tutorial, you can see how to replace the external rear-view mirror on a Fiat 600 by following some simple steps: first, purchase a new …
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Replacing the Air Conditioning Compressor on Fiat 600
Replacing the Air Conditioning Compressor on Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to replace the compressor on your Fiat 600? The Seicento is not originally equipped for air conditioning, so to fit just the compressor, you need…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos