Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Car door

The instructions in this guide will allow you to remove the front door of the Fiat Punto. First, open the front door and start unscrewing the bolts from the two hinges located at the top and bottom; then disconnect the door wiring located in the centre, between the two hinges, as shown in the video. At this point, lift the door to completely disconnect the hinges, allowing you to remove it; carry out the repair or replacement of the door, applying the reverse procedure for reassembly!

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…
How to remove the front door panel of the Fiat Grande Punto
How to remove the front door panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's instructions will show us how to disassemble and replace the front door panel of the Fiat Grande Punto, as well as the Punto Evo. First, we o…
Removing the Front Door Lock on a Fiat Punto 188
Removing the Front Door Lock on a Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In today's video, you will learn how to remove the front door lock on a Fiat Punto 188 by following these simple steps. First, open the front door an…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the Fiat Punto door switch located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos