Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Lock on a Fiat Punto 188

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door lock

In today's video, you will learn how to remove the front door lock on a Fiat Punto 188 by following these simple steps. First, open the front door and start by removing the plastic covers of the door panel, unscrewing the fixing screws located underneath; then remove the door panel and disconnect the door opening mechanism. At this point, you can unscrew the side screws of the lock using a Torx screwdriver; all that's left is to remove the entire handle along with the door lock!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Lock Cylinder on the Fiat Punto
How to Replace the Lock Cylinder on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide outlines the instructions for removing and replacing the lock cylinder on the Fiat Punto in simple and quick steps. First, open the front …
Removing the Door Lock on a Fiat Punto
Removing the Door Lock on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, learn how to remove the front door lock on a Fiat Punto. First, open the door and unscrew all the screws from the door panel:…
How to Install the Door Lock on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video, see how to install the front door panel, lock, and window mechanism on a second series Fiat Punto, following the instructions below. F…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos