Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Door Lock on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door lock

In this video, see how to install the front door panel, lock, and window mechanism on a second series Fiat Punto, following the instructions below. First, open the door and install the window seal; then proceed to mount the lock, correctly inserting the rods into the guides (fixing the side screws with a Torx spanner). At this point, install the window mechanism by tightening the nuts and connecting the electrical connector; all that’s left is to fit the door panel!

Updated on 12 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto
How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides instructions on how to remove and replace the external door handle and lock of the Fiat Grande Punto. First, open the front door …
How to Remove the Electric Lock from the Fiat Punto Door
How to Remove the Electric Lock from the Fiat Punto Door
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the electric lock from the rear door of the Fiat Punto, use a 10 mm spanner. Enter the highlighted hole in the bodywork shown in the video,…
How to Replace the Door Lock on a Fiat Punto?
How to Replace the Door Lock on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the door lock on a Fiat Punto, loosen all the screws securing the panel so that it can be removed, providing access to the components unde…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos