Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mini
  4. :
  5. Mini
  6. : How to replace the starter motor on the Mini Cooper One

Mini - Video tutorial

Model: Mini Mini R55, R56, R57 - Years 2007-2014
Part: Starter motor
Operation: How to replace the starter motor on the Mini Cooper One

In this video tutorial we will see the guide on how to disassemble and replace the Mini Cooper starter, following the instructions below. First we raise the car on the front side and start removing the small box located next to the air filter, unscrewing the screws of the clamps and unscrewing the screw with a 10 mm wrench; then we remove the filter box, thus accessing the starter motor, as illustrated in the video. Now we unscrew its fixing screws to remove it, also accessing it from below, by disconnecting its electrical connector; so let's install the new one!


Posted on 31 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2007-2014 - Where is the starter motor located on the Mini Cooper? Read Answer
    • Mini 2007-2014 - How much does it cost to replace the starter motor on the Mini Cooper? Read Answer
    • Mini 2007-2014 - Where is the starter motor located in the Mini Cooper? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos