Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on the 2014 Mini Cooper

Model: Mini Mini R57, R55, R56 - Years 2007-2014
Part:

If you want to find out how to correctly reset the tire warning light that appears on the dashboard of your 2014 Mini Cooper, just read the various steps described below carefully and then put them into practice. First, enter the car and turn on the ignition. Immediately afterwards locate the "BC" button located on the left steering lever and use it to navigate within the menu until the "Set/Info" item is displayed. At this point, hold it down to enter the new menu and scroll until you find the "Reset" option. Finally, hold down the same button one last time and release it once the reset is complete.

Posted on 26 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Mini Cooper R52
How to reset the tire pressure sensor of the Mini Cooper R52
Mini (2001-2007 / R50, R52, R53) If the tire pressure warning light on your Mini Cooper R52 continues to stay on constantly on the instrument panel and you want to manually reset it,…
How to reset the tire pressure sensor on a Mini Cooper?
How to reset the tire pressure sensor on a Mini Cooper?
Mini (2001-2007 / R50, R52, R53) To reset the tire pressure warning light on a Mini Cooper, turn on the instrument panel without starting the engine. Using the turn signal lever, acc…
To reset the tire pressure warning light on the Mini Cooper S.
To reset the tire pressure warning light on the Mini Cooper S.
Mini (2017-2023 / F60, Countryman2) Let's see in this short guide the steps that will allow us to reset the tire pressure warning light of the Mini Cooper S. Before performing the reset…

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos