Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Mini Cooper?

Model: Mini Mini F57, F56, F55, F54 - Years 2014-2023
Part: Service warning light

In this tutorial, we can see how to reset the service in a Mini Cooper. This is a very simple and quick operation that should only be done once all scheduled maintenance work has been completed. First, we go inside the car, then we turn on the dashboard and hold down the button located right on the speedometer. Once the maintenance menu appears, we scroll through the various available services, position ourselves on the element to be reset, and continue by holding down the same button again. At this point, we restart the vehicle and verify that the operation has been successful.

Posted on 13 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2007-2014 / R56, R57, R55) In a few simple steps, we will reset the maintenance light for the engine oil change of the Mini Cooper. First, get into the car and turn on the dash…
How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2010-2016 / Countryman1, R60) The service light reset on a Mini Cooper F60 model vehicle follows simple and quick steps to be performed independently. To reset the light, we must …
How to reset the service light on a Mini Cooper
How to reset the service light on a Mini Cooper
Mini (2014-2023 / F57, F56, F55, F54) .. Today we will explain how to reset the service light on a Mini Cooper vehicle. To reset the light, we need to turn on the instrument.. …

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos