Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to install the Mini roof box.

Mini - Video tutorial

Model: Mini Mini R55, R56, R57 - Years 2007-2014
Part: Bodywork
Operation: How to install the Mini roof box.

In this video, we see how to install a roof box on the Mini; of course, it is necessary to observe the weight limits for the load, but it is possible to load a large amount of luggage with this system. We found an original Mini roof box on hubauer-shop. With the code 82 73 2 223 388 at a price of 468.46 euros, plus 23.00 euros for shipping to Italy: First, the mounting plates must be inserted into the appropriate spaces, inserting the screws into the sliding blocks. Then we need to screw the fastening bolts without tightening them completely on the screws of the sliding block. We check that we can still open the rear door once the roof box is installed, and we secure it well by fixing the sliding screws. Once we have found the correct centering of the box, we can tighten the four fastening bolts above the sliding blocks. The box opens from both sides for easier loading. It is very important to secure the load so that it does not move while traveling.


Posted on 16 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2007-2014 - Why isn't the sunroof of the Mini Cooper R57 working? Read Answer
    • Mini 2001-2007 - Why won't the trunk door of the Mini Cooper open? Read Answer
    • Mini 2007-2014 - How to unlock the fuel filler flap on Mini Cooper? Read Answer
    • Mini 2001-2007 - How do you disassemble the front wheel arch of the Mini Cooper R50? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos