Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the service indicator of the Mini Cooper R50.

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Service warning light

To manually reset the service light on the dashboard display of your Mini Cooper R50, simply follow the procedure described in our new guide dedicated to you. First, get into the driver's seat and turn on the car's ignition. While doing so, press and hold the small button located on the right side of the speedometer, just below the number 150. Release the button as soon as the display shows the word "Reset" and confirm the reset of the light by holding down the same button again.

Posted on 5 December 2023 by ScegliAuto

Video tutorial

Related tutorials

Engine oil warning light reset on Mini Cooper R50
Engine oil warning light reset on Mini Cooper R50
Mini (2001-2007 / R52, R50, R53) In this video, we see the instructions that will allow us to reset the oil change routine maintenance service light on a Mini Cooper R50, second seri…
How to reset the service in the Mini Cooper?
How to reset the service in the Mini Cooper?
Mini (2001-2007 / R52, R50, R53) In this tutorial we can see how to reset the service warning light in the Mini Cooper R50, an extremely simple and fast operation. Before proceeding,…
Where is the OBD port of the Mini Cooper R50 2003 located?
Where is the OBD port of the Mini Cooper R50 2003 located?
Mini (2001-2007 / R52, R50, R53) If you own a 2003 Mini Cooper R50 and want to find out where the OBD port is located, you just need to read the following guide and apply what is des…

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos