Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure warning light of the Mini Cooper.

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Tire pressure warning light

The tire pressure warning light activates when the vehicle's TPMS system detects one or more abnormalities in tire pressure; let's briefly see how to reset the TPMS light on the Mini Cooper. After adjusting the pressure of all four tires to the recommended level, get inside the car and turn on the instrument panel. Then, press and hold the TPMS reset button located at the bottom of the center console, near the gear lever. Keep holding the button until the warning light on the instrument panel resets!

Posted on 15 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Mini Cooper
How to reset the tire pressure light on the Mini Cooper
Mini (2010-2016 / R60, Countryman1) Below we will see the information related to resetting the tire pressure warning light of the Mini Cooper; before resetting the TPMS warning, it is n…
How to reset the tire warning light on the Mini Cooper?
How to reset the tire warning light on the Mini Cooper?
Mini (2001-2007 / R53, R50, R52) Resetting the tire warning light in the Mini Cooper, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, w…
How to reset the tire pressure light in the Mini Cooper?
How to reset the tire pressure light in the Mini Cooper?
Mini (2007-2014 / R55, R57, R56) Resetting the tire pressure warning light in the Mini Cooper, as we can see in this tutorial, is an extremely simple and quick operation. Before proc…

How to Replace a Headlight Bulb on a Ford Focus

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Watch the video!


by ScegliAuto

More videos