Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on a Mini Countryman

Model: Mini Mini R60, Countryman1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: License plate light

See other generations:
Video tutorial

To replace the number plate bulb on a Mini Countryman, follow these steps shown in the video. Open the boot: use a screwdriver to remove the clear plastic cover located in the tailgate above the number plate.

Remove the bulb: Use your fingers to pull the bulb from its housing. Replace with a new bulb: insert the new bulb into the same housing.

Reconnect the connector: ensure you reconnect the connector to the bulb. Refit the previously removed cover and reconnect the battery.

Good luck!


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to remove the brake light bulb on a Mini Countryman
How to remove the brake light bulb on a Mini Countryman
Mini (2010-2016 / R60, Countryman1) Before you start, open the tailgate of your Mini Countryman. Begin by unclipping and removing the inner side cover of the boot, then unclip the clips…
How do you replace the rear headlight bulb of the Mini Countryman?
How do you replace the rear headlight bulb of the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In order to replace the rear headlight bulb of the Mini Countryman, you need to open the rear hatch so that you can locate the interior panel of the …
Replacing the Front Headlight Bulb in a Mini Countryman
Replacing the Front Headlight Bulb in a Mini Countryman
Mini (2010-2016 / R60, Countryman1) Today's guide will show you how to remove and replace the front headlight bulb in a Mini Countryman by following these simple steps. First, open the …

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos