Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oxygen sensor on a Mitsubishi Outlander.

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Checks and maintenance

Let's see in this video how to replace the upstream oxygen sensor of a Mitsubishi Outlander; in fact, the downstream one has a slightly different procedure. The one we are interested in is located at the top relative to the engine. We will need a socket, an extension, and a ratchet wrench; loosening it requires a bit of force. We then need to loosen the electrical connector located on the right side. Now we can remove the connector from its housing. We can find the new sensor, for example, on Fruugo. It has the code MN153035 at a price of 35.95 euros + 4.95 euros for shipping. Let's install the new sensor and connect the electrical connector: the downstream one will need to be replaced from underneath the vehicle.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the Mitsubishi Outlander 2
How to replace the engine air filter of the Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need a guide to correctly replace the engine air filter, then you are in the right place. All you have to d…
Replacing the Number Plate Bulbs on a Mitsubishi Outlander
Replacing the Number Plate Bulbs on a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) This guide outlines the main steps to remove and replace the number plate bulbs on a Mitsubishi Outlander. First, move to the rear of the vehicle and…
Resetting Service on a Mitsubishi Outlander
Resetting Service on a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Today, we will see how to perform the service reset on a third-generation Mitsubishi Outlander. With the ignition off but the key inserted, press the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos