Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Radiator in a Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Heater core

See other generations:
Video tutorial

To replace the heater radiator on a Mitsubishi Pajero V60, disconnect the battery and drain the coolant from the radiator. In the engine bay, disconnect the two heater hoses that enter the cabin through the bulkhead.

Inside, remove the centre console, glove box, and lower panels to access the HVAC unit. Disconnect the electrical connectors and control cables, then unscrew the bolts securing the unit.

Open the heater casing and remove the radiator. Insert the new radiator with the correct seals, close the unit, reconnect the hoses and wiring, refill the system with new coolant, and bleed the air from the system.


Posted on 17 September 2026 by ScegliAuto


Related tutorials

Replacing the Heating Radiator of the Mitsubishi Pajero 2
Replacing the Heating Radiator of the Mitsubishi Pajero 2
Mitsubishi Pajero (1991-1999 / MK 2, V20) In this video, learn how to remove and replace the heating radiator of the second series Mitsubishi Pajero. First, open the bonnet of your car and st…
How to Replace the Radiator of the Mitsubishi Pajero?
How to Replace the Radiator of the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the radiator of the Mitsubishi Pajero, open the bonnet to access the engine bay and remove the screws securing the upper radiator supports…
How to clean the clogged internal radiator of the Mitsubishi Pajero V60
How to clean the clogged internal radiator of the Mitsubishi Pajero V60
Mitsubishi Pajero (1999-2006 / V60, MK 3) In this video we can see a good method for cleaning the cabin radiator of the Mitsubishi Pajero V60: it is necessary to disconnect the heating pipes …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos