Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the clogged internal radiator of the Mitsubishi Pajero V60

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Heater core

See other generations:
Video tutorial

In this video we can see a good method for cleaning the cabin radiator of the Mitsubishi Pajero V60: it is necessary to disconnect the heating pipes which, as suggested by the youtuber, it is advisable to do from the bottom of the vehicle. Once this operation is done, we attach normal watering hoses, drawing water from a bucket with distilled water, and a recirculation pump that we can recover from an old appliance, in order to circulate the liquid inside the circuit.

After the water comes out clean, we add a specific radiator cleaner and let it run for about an hour and then reverse the flow to run it in the opposite direction, after which we can reassemble everything in its place.


Posted on 30 December 2024 by ScegliAuto


Related tutorials

How to Replace the Heater Radiator in a Mitsubishi Pajero
How to Replace the Heater Radiator in a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the heater radiator on a Mitsubishi Pajero V60, disconnect the battery and drain the coolant from the radiator. In the engine bay, disconn…
How to Replace the Radiator of the Mitsubishi Pajero?
How to Replace the Radiator of the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the radiator of the Mitsubishi Pajero, open the bonnet to access the engine bay and remove the screws securing the upper radiator supports…
How to Replace the Timing Belt on the Mitsubishi Pajero?
How to Replace the Timing Belt on the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the timing belt on the Mitsubishi Pajero, open the bonnet to access the underlying components. Once this is done, it will be necessary to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos