Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heating Radiator of the Mitsubishi Pajero 2

Model: Mitsubishi Pajero MK 2, V20 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Heater core

See other generations:
Video tutorial

In this video, learn how to remove and replace the heating radiator of the second series Mitsubishi Pajero. First, open the bonnet of your car and start by unscrewing all the screws securing the hose clips connected to the radiator, allowing all the coolant to drain out; then unscrew the side screws and disconnect the main hoses from the radiator, as shown in the video.

At this point, replace it with the new one, reassembling everything; the video demonstrates how to bleed the radiator circuit by pressurising water.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Radiator in a Mitsubishi Pajero
How to Replace the Heater Radiator in a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the heater radiator on a Mitsubishi Pajero V60, disconnect the battery and drain the coolant from the radiator. In the engine bay, disconn…
How to Replace the Radiator of the Mitsubishi Pajero?
How to Replace the Radiator of the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the radiator of the Mitsubishi Pajero, open the bonnet to access the engine bay and remove the screws securing the upper radiator supports…
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos