Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Air filter

To replace the air filter on this vehicle yourself, follow the instructions provided in this description and refer to the tutorial video. After opening the bonnet, locate the box containing the filter on the left side. Next, disconnect the steel clips securing the cover and remove the filter, replacing it with the new one while also replacing the seal. Then, reposition the cover and resecure the steel clips, and you're done.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Mitsubishi Outlander
How to replace the air filter of the Mitsubishi Outlander
Mitsubishi Outlander (2001-2006 / MK 1) The following video tutorial shows us how to replace the air filter of the Mitsubishi Outlander model MK1 on our own. The air filter is located insid…
Replacing Air Filter on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replace the cabin air filter on a Mitsubishi Outlander if you have covered a considerable distance. Open the car door, pull up the engine compartment…
How to replace the engine air filter of the Mitsubishi Outlander 2
How to replace the engine air filter of the Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need a guide to correctly replace the engine air filter, then you are in the right place. All you have to d…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos