Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Mirage

Model: Mitsubishi Mirage A00, A10, LA - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

Video tutorial

In this short video tutorial, the steps to reset the maintenance light on a Mitsubishi Mirage are shown. The operation is very simple.

First, get inside the vehicle and turn on the ignition by placing the key in the first position, without starting the engine; you will see the service light indicated by the wrench icon. Next, turn off the ignition and press the trip reset button on the car's display; hold the button until the light starts to blink.

At this point, release the button and then press it again while the light is still blinking; press until the word "clear" appears. The reset will then be complete.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mitsubishi Mirage?
How to Reset the Service Light on a Mitsubishi Mirage?
Mitsubishi Mirage (2012-2024 / A00, A10, LA) To reset the Service light on a Mitsubishi Mirage, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, verify…
How to Reset the Maintenance Light on the Mitsubishi Mirage
How to Reset the Maintenance Light on the Mitsubishi Mirage
Mitsubishi Mirage (2012-2024 / A00, A10, LA) In this video, we will see how to reset the service light on the Mitsubishi Mirage: with the ignition off, go to the button located at the base of th…
How to Reset the Service Light on a Mitsubishi Mirage
How to Reset the Service Light on a Mitsubishi Mirage
Mitsubishi Mirage (2012-2024 / A00, A10, LA) To reset the Service light on a Mitsubishi Mirage, turn on the ignition by inserting the key into the ignition switch. Once the instrument panel is o…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos