Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Mirage

Model: Mitsubishi Mirage A00, A10, LA - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

Video tutorial

To reset the Service light on a Mitsubishi Mirage, turn on the ignition by inserting the key into the ignition switch. Once the instrument panel is on, you will see the Service light illuminate.

Next, press the designated button on the instrument panel until the wrench icon appears. At this point, hold the button for a few seconds until the light resets and the maintenance interval is cleared.

Finally, you can turn off the instrument panel.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mitsubishi Mirage?
How to Reset the Service Light on a Mitsubishi Mirage?
Mitsubishi Mirage (2012-2024 / A00, A10, LA) To reset the Service light on a Mitsubishi Mirage, insert the ignition key into the ignition switch so you can turn it to the ON position to power up…
Reset Service Light on a Mitsubishi Mirage
Reset Service Light on a Mitsubishi Mirage
Mitsubishi Mirage (2012-2024 / A00, A10, LA) .. In this useful video tutorial, learn how to reset the service light on a Mitsubishi Mirage, produced from 2012 to 2023. Start the process.. …
How to Reset the Service Light on a Mitsubishi Mirage
How to Reset the Service Light on a Mitsubishi Mirage
Mitsubishi Mirage (2012-2024 / A00, A10, LA) To reset the service light on a Mitsubishi Mirage, do the following: - Turn on the ignition and close all doors; - Press the button located near the …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos