Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Mirage

Model: Mitsubishi Mirage A00, A10, LA - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

Video tutorial

To reset the service light on a Mitsubishi Mirage, do the following: - Turn on the ignition and close all doors; - Press the button located near the instrument display and wait for the light to start flashing; - Hold the button until the CLEAR message appears; - Release the button; - Press the button to enter the new mileage; Once finished, complete the reset procedure by turning the ignition off and then back on. If the reset was not successful, you can repeat the operation.

Remember to perform the reset only after completing the service.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mitsubishi Mirage?
How to Reset the Service Light on a Mitsubishi Mirage?
Mitsubishi Mirage (2012-2024 / A00, A10, LA) To reset the Service light on a Mitsubishi Mirage, insert the ignition key into the ignition switch so you can turn it to the ON position to power up…
Reset Service Light on a Mitsubishi Mirage
Reset Service Light on a Mitsubishi Mirage
Mitsubishi Mirage (2012-2024 / A00, A10, LA) .. In this useful video tutorial, learn how to reset the service light on a Mitsubishi Mirage, produced from 2012 to 2023. Start the process.. …
How to Reset the Service Light on a Mitsubishi Mirage?
How to Reset the Service Light on a Mitsubishi Mirage?
Mitsubishi Mirage (2012-2024 / A00, A10, LA) To reset the Service light on a Mitsubishi Mirage, turn on the ignition by inserting the key into the ignition switch. This will allow you to turn it…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos