|
Do it yourself
| |||
| ||||
How to Paint the Rear Hub Red on Mitsubishi Xpander
Model: Mitsubishi Xpander
Nc1w, Nc2w, MK 1, Ne3w
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
A simple and impactful modification for the Mitsubishi Xpander is to paint the lower wheel hub red, which is visible from under the rim. It's easy to do, although it requires some time. First, you need to remove the wheels, and do this safely; do not trust your jack; as suggested by the YouTuber, place the tires under the vehicle. Clean the hubs well, and sand them down with fine sandpaper so that the paint adheres properly. Protect the bolts: these should not be painted, along with the outer side of the hub and the bodywork. Start with a can of white paint or a primer. Only after that can you spray the red paint. Apply at least two coats, preferably three. You can then remount the tires. Great job!
Updated on 11 June 2026 by ScegliAuto
Related tutorials
Mitsubishi Xpander
(2017-2026 /
Nc1w, Nc2w, MK 1, Ne3w)
To replace the front brake pads on the Mitsubishi Xpander, lift the vehicle with a jack or lift so that the corresponding wheel is off the ground. At…
Mitsubishi Xpander
(2017-2026 /
Nc1w, Nc2w, MK 1, Ne3w)
It will be possible to completely reset the Service light of the Mitsubishi Xpander by holding down the button located in the bottom right of the cen…
Mitsubishi Xpander
(2017-2026 /
Nc1w, Nc2w, MK 1, Ne3w)
Replacing the battery in your Mitsubishi Xpander key is a very simple task that you can easily do on your own. Just follow the steps outlined below. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ignition; then navigate to the settings on the onboard computer and select the tire pressure option to view the values, as shown in the video. At this point, restore the correct pressure in all four tires to clear the tire pressure warning light that appears on the instrument cluster! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |