|
Do it yourself
| |||
| ||||
Where can we find the sticker with the tire pressure references on the Mitsubishi ASX?
Model: Mitsubishi Asx
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
Let's see where to find the sticker with the tire pressure recommendations on the Mitsubishi ASX: as with most modern vehicles, this sticker is located on the driver's door pillar, the vertical column where the door attaches. Here we will find the correct values, both in Bar (the unit of measurement used in the EU) and in PSI (pounds per square inch; the measurement used in Anglo-Saxon countries). The conversion ratio between these units of measurement is: 1 bar = 14.5037 PSI. These values refer to the front and rear tires, when fully loaded and under normal driving conditions; they indicate the available measurements for our vehicle and the maximum load capacity of the vehicle.
Posted on 12 December 2025 by ScegliAuto
Related tutorials
Mitsubishi Asx
(2010-2023 /
MK 1)
To reset the tyre pressure warning light on the Mitsubishi ASX, inflate the tyres to the recommended pressure value: this value is indicated on the s…
Mitsubishi Asx
(2010-2023 /
MK 1)
It will be possible to completely turn off the tire pressure warning light of the Mitsubishi ASX by inflating the tires until they reach the recommen…
Mitsubishi Asx
(2010-2023 /
MK 1)
This guide explains the procedure to reset the tyre pressure warning light on the Mitsubishi ASX. Before performing this operation, ensure that the p…
Other guides you may be interested in |
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
