Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Mitsubishi ASX?

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Mitsubishi ASX, inflate the tyres to the recommended pressure value: this value is indicated on the sticker attached to the driver's door pillar. Once all the tyres are inflated, turn on the ignition and scroll through the menu until you find the settings option.

Then scroll down to find the tyre pressure option: by holding down the OK button on the steering wheel, you can turn off the warning light.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure light in the Mitsubishi ASX?
How to reset the tire pressure light in the Mitsubishi ASX?
Mitsubishi Asx (2010-2023 / MK 1) In this tutorial we can see how to reset the tire pressure warning light in the Mitsubishi ASX, an extremely simple and quick operation, to be carrie…
How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
How to Reset the Tyre Pressure Warning Light on the Mitsubishi ASX
How to Reset the Tyre Pressure Warning Light on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) This guide explains the procedure to reset the tyre pressure warning light on the Mitsubishi ASX. Before performing this operation, ensure that the p…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos