Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Mirage
    4. : How do you replace the car radio on the Mitsubishi Mirage?

Mitsubishi Mirage - Video tutorial

Model: Mitsubishi Mirage LA, A00, A10 - Years 2012-2023
Part: Car stereo
Operation: How do you replace the car radio on the Mitsubishi Mirage?

In order to replace the Mitsubishi Mirage car radio, you need to pry with a thin object in the lower part of the air vents which are positioned immediately above the radio. After these vents have been removed, it will also be possible to pull out the old car radio, so that the connectors in its rear part can be disconnected. After the old device has been removed, it will be possible to connect the connectors of the new radio, fitting it into its seat; finally, you will also need to reposition the air vents in the upper part.


Posted on 29 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos