Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check Tyre Pressure on Your Mitsubishi Vehicle

Model: Mitsubishi Mitsubishi Various
Part: Checks and maintenance

Video tutorial

In this video, you will learn how to check the tyre pressure on your Mitsubishi vehicle. First, find the reference data, which is located on a sticker inside the driver's door, indicating the pressure for both front and rear tyres, under normal load and full load.

The value should be expressed in PSI and Bar, and if not, the conversion is not straightforward as one PSI equals 0.0689476 Bar. To perform the physical check, remove the valve cap, turn on the gauge, and take the reading. If there is too much air inside and you need to release some, simply press lightly on the back of the air release fitting of the gauge.

Then, replace the cap and move on to the next wheel.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Mitsubishi Montero?
How do you reset the tire pressure light on the Mitsubishi Montero?
Mitsubishi Mitsubishi Various In order to reset the tire pressure warning light on the Mitsubishi Montero, you need to inflate the tires until they reach the correct pressure valu…
How to open the fuel tank cap of Mitsubishi cars
How to open the fuel tank cap of Mitsubishi cars
Mitsubishi Mitsubishi Various In this short video, we see how to open the fuel cap of Mitsubishi cars in general; in fact, the same system applies to all of them. If we try to ope…
How to properly clean a Mitsubishi EGR valve
How to properly clean a Mitsubishi EGR valve
Mitsubishi Mitsubishi Various In this video we can see how to clean an EGR valve mounted generically on a Mitsubishi car: after removing it from its housing, we unscrew the four s…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos