Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install wind deflectors on the front windows of the Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years 2010-2023
Part: Checks and maintenance

In this video we can see how to install air deflectors for the Mitsubishi ASX: this is an accessory that will allow us to drive with the window open even on rainy days, without water entering the interior, wetting the door upholstery, and at the same time allowing us to ventilate the interior of the car without creating too much wind inside. They can be found on beps. It for the price of 43.95 euros, including delivery costs. Select: car/exteriors/deflectors and then follow the instructions on the website. The installation is very simple: just clean the surface where the deflector should be placed and then take the measurements carefully. When the right position is found, remove the adhesive and position it, making sure the part adheres well. Important: do not lower the windows for at least 24 hours after application.

Posted on 28 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Disassembling the Front Door Panel of a Mitsubishi ASX
Instructions for Disassembling the Front Door Panel of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) In today's video, we will see how to disassemble the front door panel on a Mitsubishi ASX, following these main instructions. First, open the front d…
How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
Where is the fuse box of the Mitsubishi ASX located?
Where is the fuse box of the Mitsubishi ASX located?
Mitsubishi Asx (2010-2023 / MK 1) In order to locate the fuse box containing the fuses for your first edition Mitsubishi ASX on your own, you must first carefully read the following g…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos