Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi V35
Part: Wheel

In this guide, we will see the instructions that will allow us to disassemble and remove the front wheel of the Moto Guzzi V35. First, let's place the motorcycle on the stand and start unscrewing the screws that secure the front brake caliper, in order to remove it from the disc; we will similarly remove the other brake caliper, as shown in the video. At this point, we unscrew the central nut of the wheel axle, pulling it out and removing it; we then take off the wheel and, if necessary, replace the tire with a new one, properly securing the wheel and reassembling the front brake calipers.

Posted on 7 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the capacitor of the Moto Guzzi V35?
How do you replace the capacitor of the Moto Guzzi V35?
V35 In order to replace the capacitor of the Moto Guzzi V35, you need to loosen the screws that secure the cover located in the front part of the engine …
How do you replace the clutch on a Moto Guzzi V35?
How do you replace the clutch on a Moto Guzzi V35?
V35 To replace the clutch on the Moto Guzzi V35, you need to loosen the screws that secure the specific side cover: once it has been removed, you can pro…
How to Remove and Overhaul the Rear Brake Pump on Moto Guzzi V35 Imola
How to Remove and Overhaul the Rear Brake Pump on Moto Guzzi V35 Imola
V35 In today's video, learn how to remove and overhaul the rear brake pump on a Moto Guzzi V35 Imola, small series. First, proceed to remove the brake pu…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos