Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Moto Guzzi V35 - Videoguide

Moto Guzzi V35
How do you adjust the valves on the Moto Guzzi V35?
In order to adjust the valves of the Moto Guzzi V35, you need to loosen the screws that secure the corresponding cover, located on the right side of the …read all…
Posted on 28 August 2023 by ScegliAuto
Moto Guzzi V35
How do you replace the rear brake pads on a Moto Guzzi V35?
In order to replace the rear brake pads of the Moto Guzzi V35 bis, you need to loosen the bolts that fix the brake caliper to the corresponding disc: the …read all…
Posted on 6 April 2023 by ScegliAuto
Moto Guzzi V35
How do you replace the Moto Guzzi tachometer cable?
In order to replace the Moto Guzzi V35 rev counter cable, you need to loosen the screws that fix the rev counter to its housing: these screws are located in …read all…
Posted on 18 May 2023 by ScegliAuto
Moto Guzzi V35
How do you replace the petrol taps on the Moto Guzzi V35?
In order to replace the petrol taps on the Moto Guzzi V35, you need to go and identify the pieces, which are located on the sides of the bike, immediately …read all…
Posted on 17 May 2023 by ScegliAuto
Moto Guzzi V35
How do you replace the rear shock absorber on the Moto Guzzi V35?
In order to replace the rear shock absorber on the Moto Guzzi V35, you need to loosen the screws that fix the saddle to the bike: these screws are located on …read all…
Posted on 7 May 2023 by ScegliAuto
Moto Guzzi V35
How do you change the engine oil of the Moto Guzzi V35?
In order to change the engine oil of the Moto Guzzi V35, you need to loosen the oil tank drain plug which is positioned in the lower part of the bike: in this …read all…
Posted on 18 December 2022 by ScegliAuto
Moto Guzzi V35
How do you replace the wheel bearings on the Moto Guzzi V35?
To be able to replace the wheel bearings of the Moto Guzzi V35 you have to completely disassemble the wheels from the bike: to do this you will need to unscrew …read all…
Posted on 29 October 2022 by ScegliAuto
Moto Guzzi V35
How to remove a Moto Guzzi V35 tire
How to remove the front wheel of a Moto Guzzi V35 Remove the plastic cap and deflate the inner tube with a pin. To unscrew the inner tube, the Youtuber created …read all…
Posted on 27 August 2022 by ScegliAuto
Moto Guzzi V35
How to remove the stator and rotor on the Moto Guzzi V35
In this short guide, let's see the tools and the procedure we will need to disassemble the flywheel and rotor on the Moto Guzzi V35, following the instructions …read all…
Posted on 27 February 2024 by ScegliAuto
Moto Guzzi V35
How to disassemble and overhaul the rear brake pump on Moto Guzzi V35 Imola
In today's video we will see how to disassemble and overhaul the rear brake pump on a Moto Guzzi V35 Imola, small series. First we proceed with the disassembly …read all…
Posted on 8 February 2024 by ScegliAuto
Moto Guzzi V35
Removing the rear wheel on Moto Guzzi V35
Unscrew the pedal nut with a 17 hex wrench and the silencer nut with a 11 wrench. Remove it and put the nut back on to avoid losing it. Unscrew the hub nut …read all…
Posted on 23 December 2023 by ScegliAuto
Moto Guzzi V35
Moto Guzzi V35 valve adjustment
Remove the valve cover with the appropriate Allen key. Look for the top dead center of the piston, but not the TDC in the exhaust phase but the compression, by …read all…
Posted on 22 December 2023 by ScegliAuto
Shock absorbers (1) Checks and maintenance (2) Bearing (1) Engine oil (1) Brake pads (1) Pump (1) Wheel (2) Valve (2) (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos