Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rev counter cable on a Moto Guzzi?

Model: Moto Guzzi V35
Part: Checks and maintenance

Video tutorial

To replace the rev counter cable on the Moto Guzzi V35, loosen the screws that secure the rev counter to its housing; these screws are located at its bottom. Once loosened, you can lift it from its seat and disconnect the underlying cable; the other end of the cable will be connected to the front of the engine block and must also be disconnected.

Once the old cable is completely removed, insert the new one, connecting it to the rev counter and the upper part of the engine block.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

V35 The main instructions in this guide will show you how to remove and replace the air filter of the Moto Guzzi V35 engine. First, place the bike on a s…
V35 To change the engine oil on a Moto Guzzi V35, loosen the drain plug of the oil reservoir located at the bottom of the bike: this way, all the oil exp…
V35 To replace the engine oil on the Moto Guzzi V35, loosen the drain plug of the oil tank, which is located at the central lower part of the vehicle: on…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos