Do it yourself
Frequently asked questions about cars and motorcycles

Model: Moto Guzzi V35
Part: Engine oil

In order to perform the oil change on the Moto Guzzi V35, you need to loosen the drain plug of the oil tank, which is located in the central lower part of the vehicle. Once the screw has been loosened, you can let all the used oil flow into a properly positioned container. After all the oil has drained out, you can also remove the oil filter located in the same position. Finally, you can top up the oil by inserting it through the breather on the right side of the motorcycle, on the corresponding crankcase.

Posted on 11 August 2024 by ScegliAuto

Video tutorial

Related tutorials

V35 To change the engine oil on a Moto Guzzi V35, loosen the drain plug of the oil reservoir located at the bottom of the bike: this way, all the oil exp…
V35 In order to replace the clutch of the Moto Guzzi V35, it is necessary to completely disassemble the transmission case, so that it is possible to acce…
V35 The main instructions in this guide will show you how to remove and replace the air filter of the Moto Guzzi V35 engine. First, place the bike on a s…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos