Do it yourself
Frequently asked questions about cars and motorcycles

Model: Moto Guzzi V35
Part: Engine

In order to disassemble the engine of the Moto Guzzi V35, you need to loosen the screws that hold it to its housing, so that it is released from the corresponding supports: then you can loosen the screws that hold the intake and exhaust pipes, also disconnecting the connectors. At this point, you can unscrew the screws that hold the cylinder heads, also removing the cylinders and pistons inside them: then, by freeing the connecting rods from the crankshaft, you can access the further components below so that everything can be disassembled.

Posted on 8 September 2024 by ScegliAuto

Video tutorial

Related tutorials

V35 To dismantle the engine of the Moto Guzzi V35, loosen the bolts that secure the engine block to the mounting pins fixed to the centre of the frame. O…
V35 To disassemble the engine of the Moto Guzzi V35 bis, you need to remove the engine block from its housing in the center of the frame: by doing this, …
V35 The main instructions in this guide will show you how to remove and replace the air filter of the Moto Guzzi V35 engine. First, place the bike on a s…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos