Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valves of the Moto Guzzi V35?

Model: Moto Guzzi V35
Part: Valve

Video tutorial

To adjust the valves of the Moto Guzzi V35, loosen the screws that secure the valve cover located on the right side of the bike. Once these screws are loosened, you can remove the cover and locate the underlying valves.

These can now be adjusted using a feeler gauge: this will allow you to check the clearance and restore it to the optimal values. After the adjustment is complete, reposition the valve cover, securing it with the appropriate screws and ensuring everything functions correctly.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Valve Adjustment on Moto Guzzi V35
Valve Adjustment on Moto Guzzi V35
V35 Remove the valve cover with the appropriate Allen key. Find the top dead centre of the piston, but not at the exhaust TDC, rather at the compression …
How to replace the engine oil on the Moto Guzzi V35?
How to replace the engine oil on the Moto Guzzi V35?
V35 To replace the engine oil on the Moto Guzzi V35, loosen the drain plug of the oil tank, which is located at the central lower part of the vehicle: on…
How to Change the Engine Oil on a Moto Guzzi V35?
How to Change the Engine Oil on a Moto Guzzi V35?
V35 To change the engine oil on a Moto Guzzi V35, loosen the drain plug of the oil reservoir located at the bottom of the bike: this way, all the oil exp…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos