Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Adjustment on Moto Guzzi V35

Model: Moto Guzzi V35
Part: Valve

Video tutorial

Remove the valve cover with the appropriate Allen key. Find the top dead centre of the piston, but not at the exhaust TDC, rather at the compression stroke, by engaging fifth gear and rotating the rear wheel. When the piston nearly touches the spark plug, you are at top dead centre.

Adjust the valves to 0.15 for intake and 0.20 for exhaust. Use a feeler gauge and a spanner to lower or raise the valves.

If in doubt, it is advisable to keep the valves wider rather than tighter than the desired value: if the intake valve is 0.20 instead of 0.15, that is acceptable; it will just be a bit noisier.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Adjust the Valves of the Moto Guzzi V35?
How to Adjust the Valves of the Moto Guzzi V35?
V35 To adjust the valves of the Moto Guzzi V35, loosen the screws that secure the valve cover located on the right side of the bike. Once these screws ar…
How to Replace the Clutch on the Moto Guzzi V35?
How to Replace the Clutch on the Moto Guzzi V35?
V35 To replace the clutch on the Moto Guzzi V35, locate the cover on the right side of the bike, just below the two engine cylinders: once this cover has…
How to replace the clutch on a Moto Guzzi V35?
How to replace the clutch on a Moto Guzzi V35?
V35 To replace the clutch on a Moto Guzzi V35, you need to completely remove the transmission cover to access the area between it and the engine block: h…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos