Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the brake pads on the Moto Guzzi V7, first position the bike on a stable stand on a flat surface. Once done, start by removing the old brake pads from the front brake by simply removing the two springs that secure the pins of the pads (the pins, in turn, secure the brake pads in their housing within the brake block mounted on the wheel). Now, extract the pads from their housing and replace them with new ones. Reassemble everything by following the same steps in reverse. For replacing the brake pads on the rear wheel, once you locate the brake block, unscrew the two bolts using a suitable spanner to access the pads, which can be easily replaced. Reassemble everything and you're done!

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a Moto Guzzi V7 Classic?
How to Replace the Brake Pads on a Moto Guzzi V7 Classic?
V7 Classic To replace the brake pads on a Moto Guzzi V7 Classic, you must perform the same operation on both the front and rear wheels: it will be necessary to …
How to Replace the Front Brake Pads on a Moto Guzzi V7
How to Replace the Front Brake Pads on a Moto Guzzi V7
V7 Classic To replace the front brake pads on a Moto Guzzi V7, use pliers to detach the retaining rings from the pins located at the top and bottom of the brake…
How to Replace the Tyres on a Moto Guzzi V7 Stone
How to Replace the Tyres on a Moto Guzzi V7 Stone
V7 Classic This guide provides the main instructions on how to remove and replace the tyres on a Moto Guzzi V7 Stone. First, place the motorcycle on a stand and…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos